SERVICES

1.1Based on the analysis of products, process and utilities basic conceptual layouts based on international regulatory &other regulatory compliance are prepared, incorporating present and future requirements.

1.2Develop Plot Plan & Contour Planning

1.3Develop Plant Layout

1.4Man and Material Movement Drawings

1.5Preliminary Architectural Drawings of the facility

1.6HVAC, Zoning with basis of Design

1.7Preliminary Specification for Utility

1.8Estimating Electrical Power Requirement

1.9Project Scheduling & Cost Estimating

1.10Future Expansion Possibilities with using existing utilities or ease in adding

1.11Environmental & Safety Engineering

2.1Process Engineering

2.2Architectural

2.3Civil & Structural

2.4Electrical

2.5Mechanical & Piping

2.6HVAC

2.7Validation

2.8Utility

2.9Automation

3.1 Base4d on the specific process, we develop with “VSER” Process flow diagram PFD.

3.2 Production capacity planning & forecast.

3.3Synchronizing process with respect to production capacity and hence, capacity calculation of process equipment.

3.4 Process Equipment:- development of “User Requirement Specification” for selection and ordering.

3.5 Process Equipment F.A.T. (Factory Acceptance Test)

4.1Architectural Working Drawings showing Plans, Elevations and Sections.

4.2Preparation of Room Book & Room finishes & material selection for inside and outside.

4.3Generation of Perspective views.

5.1Complete civil and structural engineering design and general layout as well asdetailed drawing for RCC, Structural Steel and Allied Works.

5.2Foundation drawings for equipment.

5.3Design and drawings for cable racks or busbar pipe racks and bridges and their foundations, as required.

5.4Specifications, BOQ’s and detailed tender documents for Civil Construction.

5.5Approval of the detailed fabrication drawing for structural members prepared by contractors in compliance as per applicable code, design basis etc

6.1Engineering Design and drawings based on the preliminary line diagram.

6.2Electrical Classification.

6.3Detailed comprehensive specifications for all electrical requirement including switch boards etc.

6.4Design and detailed layout drawings for distributions of power, lighting, earthing lightening protection system, fire alarm, public address systems, and computernetwork etc.

6.5Schedule quantities (BOQs) and specifications for all electrical items such as switch gears, cables, lighting fixtures, fittings etc.

6.6Tender document for electrical / instruments installation work laying down the methods of erection, testing and start-up.

6.7Checking & Approval of contractor’s / sub-contractors working drawings and vendor’s Certification of work & bill approval / certification.

7.1Utility flow diagrams based on user’s requirement.

7.2Mechanical / piping tender document specifying all requirements.

7.3BOQ’s and recommendation of contractor for installation work.

7.4Approval of contractor’s and vendor’s working drawings, approval of work & Bill Certification.

8.1Identifying air conditioning system based on requirement for different manufacturing function and facilities.

8.2Area Classification

8.3Clean Room

8.4Contamination Control

8.5Design and detailed specifications and tender drawings for all items requirement related to HVAC.

8.6Detailed specifications, BOQs and Tender Specifications.

8.7Invite bids and recommend qualified contractors.

8.8Check and approve vendor working drawings & documents as well as checking the Validation Process.

9.1Drawings and Specifications

9.2Steam (Pure and Commercial)

9.3Purified Water System

9.4WFI System

9.5Central Vacuum system and Dust Extraction system.

9.6Compressed Air System

9.7Gas System

9.8CIP System, SIP System.

9.9Checking & approving of working drawing of vendor / contractor.

Designing of Building Management System as per latest regulatory requirement, which is required for Monitoring, recording and validation of:

10.1Process / Utility / HVAC / Fire & Safety

10.2Developing Tender documents for Building Management System.

10.3Approval of the vendor for BMS.

10.4Implementation of Building Management System

11.1Validation of HVAC & Utilities.

11.2 Preparation of IQ,OQ,PQ.

12.1Certification and approval of following for final payments.

12.2Equipment Inspection at vendor works.

12.3Witness and Approval of System Commissioning &

12.4Balancing by vendor / contractor.

12.5Approval of Validation of the various engineering system supplied and installed by contractors.